Sea&Sea MDX-α7IV for SONY a7RIV

[Description]

Sea&Sea MDX-α7IV for SONY a7RIV

[Features]

• Equipped with Grip plus,SA8 Fixed Ball Bases,Leak Sentinel XB (Optional)
• For better noticeability, controls is partially colored with yellow.
• Compatible with the Sea&Sea, “Manual Flash Trigger/S” (optional).
• The camera can be mounted in the housing with its LCD monitor extended from the camera to reduce the distance between the rear window and monitor to increase visibility.
• Compatible with Optical YS Converter S1
• Buoyancy Pocket
• Compatible with all the DX (NX) series ports.

[Other Features]

• The Port Lock prevents the port from turning or loosening and the Port Lock lever is specifically located to avoid being unlocked accidentally.
• The housing is equipped with a lens-lock release button which makes it possible to change lenses easily, without opening the housing.
• Pulling out the Focus/Zoom Dial gives sufficient room inside the housing to easily accommodate larger diameter lenses.
• The camera’s diopter adjustment dial can be operated from outside the housing. This feature is useful when two or more people with different eyesight use the housing.
• All controls have luminescence stickers which glow in dark environment.
• Equipped with the Optical Viewfinder 0.5x as standard. Other optional viewfinders such as the VF180 1.2x, VF45 1.2x and Optical Viewfinder 0.66x, 0.8x can be used.
  ※Some vignetting occurs.When the VF180 1.2x is mounted on housing, the uper part of the camera's viewfinder cannot be viewed due to vignetting. 
• Sync Cord 2-pin Connector enables use of conventional hardwired Sync cable (Manual mode only).
• Equipped with two sacrificial zinc diodes (one on the front case and the other on the rear) to prevent electrolysis damage.
• Built-in leak sensor immediately alerts you to water ingress.
• Tripod screw mount is located on the centre underside of the housing.
• Equipped with under guard to protect from scrach.

[Specification]

[Construction] Body: corrosion-resistant aluminum alloy (machined)  / Grip: corrosion-resistant die-cast aluminum alloy
[Depth rating] 100m / 330ft
[Dimensions (WxHxD)] 330 x 189 x 131 mm / 13.0 x 7.4 x  5.2 inches
[Weight] Approx. 2,800g / 98.8oz (Housing only)

[Manual / Port Chart]

• Instruction Manual
  
• System Chart for MDX Mirrorless Housings(for Sony)